AEG Thyro-A H1 Series Operating Instructions Manual page 22

Tab. 18 Cyclic input and output data with Thyro-A 1A...C05
Offset
0 Load voltage phase 1
4 Load current phase 1
8 Load current phase 2
12 Total load current
16 Power phase 1
20 Power phase 2
24 Total power
28 Mains voltage L1
30 Switch-on angle alpha phase 1
32 Total setpoint
34 Fault (see table 14b)
36 Status (see table 14b)
Offset Output data, setpoint
0 Master setpoint
Tab. 19 Cyclic input and output data with Thyro-A 1A...C07
Offset
0 Load voltage L1
4 Load current L1
8 Power L1
12 Mains voltage L1
14 Load temperature
16 Switch-on angle alpha
18 Total setpoint
20 Fault (see table 14b)
22 Status (see table 14b)
Offset Output data, setpoint
0 Master setpoint
Supported operating modes TPM; TSC; TMU
With the Thyro-Power Manager, Thyro-Step Controller and Thyro-Measurement Unit the input and output
data are depend on the operating mode. The following table shows which operating mode the devices
support.
Tab. 20 Supported operating modes
Thyro-Power Manager
Thyro-Step Controller
Thyro-Measurement Unit
Input data, actual values
Input data, actual values
TPM
automatic
X
-
-
Data type
float
float
float
float
float
float
float
integer
integer
integer
integer
integer
Data type
integer
Data type
float
float
float
integer
integer
integer
integer
integer
integer
Data type
integer
TSC
manual
X X
- X
- -
22
Size Unit
4 [V]
4 [A]
4 [A]
4 [A]
4 [W]
4 [W]
4 [W]
2 [V]
2 [0.01 °el]
2 4096=100%
2 -
2 -
Size Unit
2 4096=100%
Size Unit
4 [V]
4 [A]
4 [W]
2 [V]
2 [°C]
2 [0.01 °el]
2 4096=100%
2 -
2 -
Size Unit
2 4096=100%
TIO TMU
X X
X X
X X