Mac Address Table Settings - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide

MAC Address Table Settings

This window is used to display and configure the global MAC address table settings.
To view the following window, click L2 Features > FDB > MAC Address Table Settings, as shown below:
The fields that can be configured are described below:
Parameter
Aging Time
Click the Apply button to accept the changes made.
After selecting the MAC Address Learning tab option, at the top of the page, the following page will be available.
Figure 5-3 MAC Address Table Settings (MAC Address Port Learning Settings) Window
The fields that can be configured are described below:
Parameter
From Port - To Port
Status
Click the Apply button to accept the changes made.
Figure 5-2 MAC Address Table Settings (Global Settings) Window
Description
Enter the MAC address table aging time here. This value must be between 10 and
1000000 seconds. Entering 0 will disable MAC address aging. By default, this
value is 300 seconds.
Description
Select the range of ports that will be used for this configuration here.
Select to enable or disable the MAC address learning function on the ports
specified here.
68