Stp Instance - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
The fields that can be configured for Instance ID Settings are described below:
Parameter
Instance ID
Action
VID List
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

STP Instance

This window is used to display and configure the STP instance settings.
To view the following window, click L2 Features > STP > STP Instance, as shown below:
The fields that can be configured are described below:
Parameter
Instance Priority
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Description
Enter the instance ID here. This value must be between 1 and 32.
Select the action that will be taken here. Options to choose from are Add VID and
Remove VID.
Enter the VID list value here. This field is used to specify the VID range from
configured VLANs set on the Switch.
Figure 5-38 STP Instance Window
Description
After clicking the Edit button, enter the Instance Priority value here. The range is
from 0 to 61440.
94