Dhcp Server Screening Port Settings - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
After clicking the Binding button, the following window will appear:
The fields that can be configured are described below:
Parameter
Client MAC
Click the Apply button to accept the changes made.

DHCP Server Screening Port Settings

This window is used to display and configure the DHCP server screening port settings.
To view the following window, click Security > DHCP Server Screening > DHCP Server Screening Port Settings,
as shown below:
The fields that can be configured are described below:
Parameter
From Port - To Port
State
Server IP
Profile Name
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Figure 9-50 Bind Client MAC Window
Description
Enter the MAC address used here.
Figure 9-51 DHCP Server Screening Port Settings Window
Description
Select the appropriate port range used for the configuration here.
Select to enable or disable the DHCP server screening function on the port(s)
specified.
Enter the DHCP server IP address here.
Enter the DHCP server screening profile that will be used for the port(s) specified
here.
207