ECC800 Data Center Controller
User Manual
----End
Follow-up Procedure
Choose Home > Plan View on the ECC800 WebUI, and drag the device to the corresponding
position in the Smart Module View pane based on the actual device layout.
8.1.29 How Should I Add Devices Accessed Through the ETH
Converter to the ECC800 WebUI?
Context
Figure 8-29 Network diagram
Issue 05 (2019-09-16)
Figure 8-28 Device accessed the ECC800
If the device does not exist, check that the cable is properly connected between the
device and the ECC800 and that the device and ECC800 are operating properly.
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
240