104/117
Bosch Rexroth AG
Software
Testing the Keyboard
9.5.4
Saving Files
9.5.5
File Transmission
Transmission via ActiveSync
Fig.9-16:
Version information
This message displays the version of the WinCE-SW Image and of the Config
Tool installed on the IndraControl VCH 08.1 and the version of the IndraControl
VCH 08.1.
The "Key Test" tab is contained in the "Config Tool", see
figuration Tool (Config Tool)" on page
Fig.9-17:
Test field for keyboard text
This tab is used for testing the keyboard.
By pressing a key, the assigned Virtual Key Code (HEX) and the Event "press‐
ed" are displayed.
By releasing a key, the assigned Virtual Key Code (HEX) and the Event "re‐
leased" are displayed.
Saving files has to be carried out in the "FlashDrv" directory. The contents of
further directories are not saved during switching off.
Please refer to
chapter 9.4 "Remote Software ActiveSync" on page 100
notes on transmission via ActiveSync.
DOK-SUPPL*-VCH*08.1***-PR02-EN-P
Rexroth IndraControl VCH 08.1 Hand-held Terminal
100.
chapter 9.5.3 " Con‐
for