Powering the Transmitter
When the two units are connected with Blue tooth, powe
ring the receiver on or off automatically powers the trans
mitter on or off�
The receiver alerts you to changes in the transmitter's
power status�
Setting the Frequency
Changing the receiver's frequency automatically upda
tes the transmitter's frequency to match� If the frequency
is changed on the transmitter, the receiver automatically
updates to match as well�
6 – English
Switching to internal
batteries�
Powered off due to
Power key press�
Powered off due to
low battery�
Transmitter Control Screen
When the devices are connected, you can see the trans
mitter's screen from the receiver� The transmitter control
screen allows you to control the transmitter's frequen
cy mode, choose between direct connect or inductive
mode, and adjust output power remotely� You can also
remotely power the transmitter on or off and know if the
transmitter has powered off unexpectedly�
Any changes made on the transmitter to frequency, dire
ct connect or inductive mode, and output power can be
seen on the receiver�
To open the transmitter control screen on the receiver,
press the Menu key
, then press the Right Arrow key
to toggle in and out of the transmitter's control screen�
If more than one Blue tooth enabled Seek Tech transmit
ter is present, press the Left Arrow key
rough available transmitters� Press the serial number li
sted below the transmitter icon to identify the specific
transmitter you want to control�
to cycle th