SPYDER MODEL 5 ENGINEERING TOOL – USER GUIDE
8. Click OK.
RESULT: If as a result, any inconsistencies of the application appear between the disconnected IRM BACnet device
and the discovered Spyder Model 5 controller, a notification message will be displayed and the relevant
synchronization status is indicated in the control manager (see section "Synchronicity Check via Control Manager", p.
35).
9. To solve any inconsistencies, synchronize the applications by doing any of the following:
•
Clear project
•
Clear controller
•
Teach to controller
•
Learn from controller
•
Checking Hardware Compatibility
For detailed descriptions, please refer to the corresponding sections:
•
Clearing Project, p. 85
•
31-00282ES-01
30