Labels - Grizzly G0779 Owner's Manual

CHECK OIL
LEVELS BEFORE USING!
54 x 54mm
REFER TO
OWNER'S MANUAL
FOR OIL TYPE AND
AMOUNT.
NOTICE
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
G0779 Machine Labels A
• Label is actual size
• Label must be made of
(12/05/14)
COLOR CODES
WARNING PANTONE 151 C or RAL 2005 GRIZZLY LOGO RED PANTONE 711C or RAL 3020
NOTICE PANTONE 3005 C or RAL 5005 GRIZZLY GREEN PANTONE 568C
G0779
L1 90 RPM
L2 210 RPM
L3 345 RPM
H1 670 RPM
H2 1180 RPM
H3 1970 RPM
13
WARNING! 5
12
To reduce risk of death
or serious injury, read
11
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to 10
www.grizzly.com. 4
9
EYE/FACE INJURY
HAZARD!
8
Always wear
ANSI-approved safety
Change spindle
glasses and face shield
7 3
when using this
speed or rotation
machine.
6 direction ONLY
WARNING!
when spindle is
ENTANGLEMENT
HAZARD! 5
completely
Tie back long hair, roll up
2
long sleeves, and remove
stopped.
loose clothing, jewelry, or 4
gloves to prevent getting
caught in moving parts.
3
2 1
1
0
cm in 0
407
340 x 190 mm
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
REF PART # DESCRIPTION
401 P0779401 ELECTRICITY LABEL
402 P0779402 GEARBOX OIL LEVEL NOTICE
403 P0779403 MACHINE ID LABEL
404 P0779404 GRIZZLY BEIGE TOUCH-UP PAINT
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
-46-
401
17 x 19mm
COLOR CODES
DANGER PANTONE 485 C or RAL 3001
WARNING PANTONE 151 C or RAL 2005
CAUTION PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
PANTONE 711C or RAL 3020
GRIZZLY LOGO RED
34.5 x 80mm
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
oil-resistant material
If
406

Labels

If
REF PART #
405 P0779405
406 P0779406
407 P0779407
CHECK OIL
LEVELS BEFORE USING!
17 x 19mm
54 x 54mm
REFER TO
OWNER'S MANUAL
FOR OIL TYPE AND
AMOUNT.
NOTICE
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
34.5 x 80mm
402
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
G0779 Machine Labels B
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com
(12/05/14)
MODEL G0779
HEAVY-DUTY 23 " GEARHEAD
DRILL PRESS
Specifications
Motor: 2 HP, 220V, Single-Phase, 60 Hz, 8.6A To reduce the risk of serious injury when using this machine:
Motor Speed: 1720 RPM 1. Read and understand owner's manual before operating.
Swing: 23-3/8"
2. Always wear approved safety glasses.
Distance Spindle to Column: 11-11/16"
3. Only plug power cord into a grounded outlet.
Distance Spindle to Table: 26-1/2"
4. Disconnect power before setting up or servicing.
Spindle Taper: R-8
5. Avoid entanglement with spindle—tie back long hair, roll up long sleeves,
Spindle Travel: 5"
Number of Spindle Speeds: 6 and DO NOT wear loose clothing, gloves, or jewelry.
G0779 Machine Labels B
Spindle Speed Range: 90 – 1970 RPM 6. Properly set up machine before starting.
Vertical Table Travel: 24-3/8"
7. Keep all guards and covers in place during operation.
Table Swivel Around Column: 360˚
8. Clamp workpiece to table to prevent rotation.
Drilling Capacity Mild Steel: 1-1/4"
9. Avoid positioning hands where they could slip into rotating bits.
Gearhead Fluid Capacity: 4-3/4 qt.
(12/05/14)
10. Always remove chuck keys and other tools before starting.
(Grizzly #T23963 or ISO 32 Equivalent)
11. Never attempt to slow or stop spindle with hands or tools.
Weight: 706 lbs.
12. Use correct speeds for drilling accessories and workpiece.
Date
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
S/N
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
403
CHECK OIL
LEVELS BEFORE USING!
17 x 19mm
Specifications
54 x 54mm
REFER TO Motor: 2 HP, 220V, Single-Phase, 60 Hz, 8.6A
OWNER'S MANUAL
Motor Speed: 1720 RPM
FOR OIL TYPE AND
Swing: 23-3/8"
AMOUNT.
Distance Spindle to Column: 11-11/16"
WARNING
Distance Spindle to Table: 26-1/2" 404
NOTICE
Spindle Taper: R-8
CAUTION
Spindle Travel: 5"
Number of Spindle Speeds: 6
Do not exceed gearbox oil level
Spindle Speed Range: 90 – 1970 RPM
Vertical Table Travel: 24-3/8" GRIZZLY LOGO RED
above red dot in center of oil
Table Swivel Around Column: 360˚
site glass below.
Drilling Capacity Mild Steel: 1-1/4" 34.5 x 80mm
Gearhead Fluid Capacity: 4-3/4 qt.
(Grizzly #T23963 or ISO 32 Equivalent)
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
Weight: 706 lbs.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
Date
artwork changes are required, contact us immediately at manuals@grizzly.com.
S/N
CHECK OIL
LEVELS BEFORE USING!
54 x 54mm
REFER TO
OWNER'S MANUAL
FOR OIL TYPE AND
AMOUNT.
405
NOTICE
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without ap
artwork changes are required, contact us immediately at
DESCRIPTION
CHECK OIL LABEL
GRIZZLY GREEN TOUCH-UP PAINT
CONTROLS/WARNING LABEL
Model G0779 (Mfd. Since 09/14)
COLOR CODES
DANGER
PANTONE 485 C or RAL 3001
WARNING PANTONE 151 C or RAL 2005
CAUTION PANTONE 109 C
NOTICE PANTONE 3005 C or RAL 5005
GRIZZLY LOGO RED PANTONE 711C or RAL 3020
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
106 x 175.5mm
MODEL G0779
HEAVY-DUTY 23
DRILL PRESS
To reduce the risk of serious injury when using this machine:
COLOR CODES
1. Read and understand owner's manual before operating.
DANGER PANTONE 485 C or RAL 3001
2. Always wear approved safety glasses.
3. Only plug power cord into a grounded outlet.
PANTONE 151 C or RAL 2005
4. Disconnect power before setting up or servicing.
PANTONE 109 C
5. Avoid entanglement with spindle—tie back long hair, roll up lo
and DO NOT wear loose clothing, gloves, or jewelry.
NOTICE PANTONE 3005 C or RAL 5005
6. Properly set up machine before starting.
PANTONE 711C or RAL 3020
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent rotation.
9. Avoid positioning hands where they could slip into rotating bit
10. Always remove chuck keys and other tools before starting.
11. Never attempt to slow or stop spindle with hands or tools.
12. Use correct speeds for drilling accessories and workpiece.
If
13. Do not operate when tired or under influence of drugs or alcoh
14. Do not expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
17 x 19mm
GRIZZLY LOGO RED
34.5 x 80mm
DO NOT REPRODUCE OR CHANGE THIS ART