Table of Contents
Advertisement
Positioning
Headstock
The Model G0779 headstock moves vertically,
pivots 360° around the column, and tilts 90° left
or right.
Tools Needed
Wrench 24mm ................................................... 1
Wrench 22mm ................................................... 1
Raising/Lowering Headstock
1.
DISCONNECT MACHINE FROM POWER!
2.
Loosen two hex nuts shown in Figure 14.
Figure 14. Location of hex nuts that lock
headstock to column.
Model G0779 (Mfd. Since 09/14)
3.
Use head elevation crank shown in Figure 15
to adjust headstock height.
Head
Elevation
Crank
Qty
Figure 15. Location of head elevation crank.
4.
Retighten hex nuts before connecting to
Hex
power.
Nuts
Pivoting Headstock Around Column
1.
DISCONNECT MACHINE FROM POWER!
2.
Loosen hex nuts shown in Figure 14.
3.
Make sure headstock and cords can move
unobstructed, then manually rotate head-
stock around column Figure 15.
4.
Retighten hex nuts before connecting to
power.
-21-
Advertisement
Table of Contents
