Change The Operating Mode Of Ventilation Equipment - Honeywell T7525 User Manual

USING THE TOUCHPAD
Base Screen
o
Set: C: 80 Warmer
o
Cooler
Actual: 80
Options
Rate: NORMAL
Next
12:25PM Mon
First Options Menu
Options
Hold Temperature
More
Second Options Menu
Options
Run Schedule
Climate Control
Present Time/Day
More
Ventilation Screen
Ventilation
AUTO
Change Mode
Step 1
You can change the operating mode of ventilation equipment (if installed). Follow these
steps:
Select
1. From the Base screen, press the Options soft key. The screen displays the first
Options menu.
Back
2. Press the More soft key. The screen displays the second Options menu.
M8625A
3. Press the Climate Control soft key. The screen displays the Climate Control
menu.
Step 2
4. Press the Ventilation soft key. The screen displays the Ventilation screen with the
current operating mode highlighted.
Select
NOTE: If ventilation is not a part of the system, the screen displays a message
Back
that ventilation was not installed.
5. To change the operating mode, repeatedly press the Change Mode soft key until
M8626A
the desired operating mode displays (AUTO and ON).
Step 3
6. Perform one of the following:
Select
a. To accept the changes, press the Select key. The screen displays the
Climate Control menu.
Back
b. To cancel step 5, press the Back key within one minute. The screen
displays the Climate Control menu.
M8627A
7. Press the Select key repeatedly until the Base screen displays.
Steps 4-6
Select
Back
M8632A
T7525/T7526 THERMOSTAT TOUCHPAD

Change the Operating Mode of Ventilation Equipment

9
69-0860—1