ABB Relion 670 Series Applications Manual page 493

1MRK 511 358-UUS A
Section 21
21.1 IED identifiers
21.1.1 Application
IED identifiers (TERMINALID) function allows the user to identify the individual IED in the system,
not only in the substation, but in a whole region or a country.
21.2 Product information
21.2.1 Application
The Product identifiers function contains constant data (i.e. not possible to change) that uniquely
identifies the IED:
• ProductVer
• ProductDef
• FirmwareVer
• SerialNo
• OrderingNo
• ProductionDate
• IEDProdType
The settings are visible on the local HMI , under Main menu/Diagnostics/IED status/Product
identifiersand underMain menu/Diagnostics/IED Status/IED identifiers
This information is very helpful when interacting with ABB product support (e.g. during repair and
maintenance).
21.2.2 Factory defined settings
The factory defined settings are very useful for identifying a specific version and very helpful in the
case of maintenance, repair, interchanging IEDs between different Substation Automation
Systems and upgrading. The factory made settings can not be changed by the customer. They can
only be viewed. The settings are found in the local HMI under Main menu/Diagnostics/IED status/
Product identifiers
The following identifiers are available:
• IEDProdType
Application manual
Basic IED functions
Use only characters A-Z, a-z and 0-9 in station, object and unit names.
Section 21
Basic IED functions
IP15060-1 v1
M15324-3 v6
GUID-F67243CA-2429-4118-BBFF-3D62BF55E080 v1
GUID-D78786E6-C34A-4E63-9D1E-0582C8F1F7E1 v6
M11789-39 v10
487