Table of Contents
Advertisement
C
OMMISSIONING
Further remove the extension box cover, the touch shield the I/O plate with I/O
2
grommet plate. Locate the EMC jumper on the EMC board (see magnification be-
low) and remove it.
Figure 57.
CAUTION! Before connecting the drive to mains make sure that the EMC protec-
tion class settings of the drive are appropriately made.
NOTE! After having performed the change write
er included in the delivery (see below) and note the date. Unless already done,
attach the sticker close to the name plate the drive.
Product modified
EMC-level modified C1->C4
'EMC level modified'
Date:
Date:
DDMMYY
Date:
Honeywell
• 64
on the stick-
6
Advertisement
Table of Contents
