Sony HCD-GZR33D Operating Instructions Manual page 90

To adjust the graphic equalizer and
store the user equalizer setting
You can adjust the sound by raising or
lowering the level of specific frequency
band, then store up to three user
equalizer settings, in the memory.
1
Press EQ BAND repeatedly to select a
frequency band or surround effect.
2
Press / to adjust the level or
select surround effect you want.
3
Repeat steps 1 and 2 to adjust the
level of other frequency bands and
surround effect.
4
Press ENTER.
"MEMORY EQ-1" appears in the
display.
0
GB
5
6
Tip
If you do not want to store the setting, press
/ to select "EXIT?" and then press
ENTER.
Equalizer level
Press / to select a user
equalizer number (1 – 3) for the
equalizer setting ("MEMORY EQ-1"
through "MEMORY EQ-3") you want
to store.
Press ENTER.
This setting is automatically stored as
the user equalizer setting you selected
in step 5.
The previous setting stored at this
memory location is erased and
replaced by the new setting.