Sony HCD-GZR33D Operating Instructions Manual page 116

The USB device is not recognized.
 Turn off the system and reconnect the
USB device, then turn on the system.
 Connect the supported USB device
(see "Compatible devices with this
system" (page 130)).
 The USB device does not work
properly. Refer to the operating
instructions supplied with the USB
device for how to deal with this
problem. If the problem persists,
contact your nearest Sony dealer.
"Data error" appears on the display
when playing a USB device.
 The MP3 file/JPEG image file you want
to play is broken.
 The JPEG image file format does not
conform to DCF.
 The JPEG image file has the extension
".jpg" or ".jpeg, " but is not in JPEG
format.
Play does not start.
 Turn off the system and reconnect the
USB device, then turn on the system.
 Connect the supported USB device
(see "Compatible devices with this
system" (page 130)).
 Press  (or  on the unit) to start
playback.
Play does not start from the first
track.
 Set the play mode to Normal Play
mode.
11
GB
Files cannot be played back.
 The MP3 file does not have the
extension ".mp3. "
 The WMA file does not have the
extension ".wma. "
 The AAC file does not have the
extension ".m4a. "
 The DivX video file does not have the
extension ".avi" or ".divx. "
 The MP4 file does not have the
extension ".mp4. "
 The audio file is not stored in MP3/
WMA/AAC/MP4 format.
 The video file is not stored in MP4/
DivX format.
 The JPEG image file does not have the
extension ".jpg" or ".jpeg. "
 The JPEG image file is larger than
3,072 (width) × 2,048 (height) in
normal mode, or more than 2,000,000
pixels in Progressive JPEG mode which
is mainly used on the Internet website.
 JPEG image files with a high width to
length ratio cannot be played back.
 Check the "MEDIA" setting (page 137).
 USB device formatted with file systems
other than FAT12, FAT16 or FAT32 are
unsupported.*
 The MP3 file is not stored in MP3
(MPEG 1 Audio Layer 3) format.