Setting The Lcd - Sony HCD-GZR33D Operating Instructions Manual

When using a TV
Turn on the TV and select the video
input so that you can view the pictures
from this system.
Operating a Sony TV
You can use the following buttons to
operate a Sony TV. These buttons have
been marked in yellow.
To Press
TV / while
Turn the TV on
or off holding down TV.
Switch the TV's TV INPUT while
input source holding down TV.
between the TV
and other input
sources
Select the TV TV CH +/ or
channels numeric buttons*
while holding down
TV.
Adjust the TV VOL +/ while
volume of the TV holding down TV.
speaker(s)
* For double digit number, hold down TV
and press -/-- , then press the number. (For
example, hold down TV, press -/-- , then 2
and 5 for entering 25.)

Setting the LCD

You can make adjustments to pictures
displayed in the LCD.
Use buttons on the unit and confirm
operations in the LCD, for the following
settings.
Note
Playback settings stored in the disc take
priority over the LCD settings. Therefore, some
of the LCD settings may not be performed.
1
Press OPTIONS on the unit
repeatedly until "PICTURE
MODE" or "WIDE MODE" appears
in the LCD.
2
Press  or  repeatedly to select
the desired setting, then press
ENTER.

Continued
1
GB