Viewing Input Channels And Input Details - Honeywell Touchpoint Plus Wireless Technical Handbook

3020M5001_Iss 1_07/18

6.9 Viewing Input Channels and Input Details

From the Input screen, toggle the Home icon
Output.
1) From the Input screen, select Channel List or Channel Tile.
2) A list of all input channels is shown in order of channel ID. The channel ID, gas name, status
minimum/maximum peak concentration and current reading will be shown.
3) The list can be filtered by status – Alarm, Fault, Inhibit, Warning or All.
4) Select a channel and Channel detail screen will show up as shown below. Depending on access level, a
number of options will be shown.
Function Access Level
Calibration Engineer
Channel
Engineer
configuration
Peak reset Engineer
Inhibit Engineer
Trend Graph Viewer
Channel
Viewer
location
Input Details Viewer
Operating Instructions
Comment
Option to calibrate the channel
Change the input channel configurations
Reset peak reading of the channel
Inhibits the channel. On an inhibited channel, this option is Clear Inhibit. See
Normal Operation, Inhibit for more information.
Shows the trend graph for the channel. See Normal Operation, View Trend
Graph for more information
Show physical position of IO Module and channel.
Shows detailed information about the channel including Custom ID, sensor
and gas name, gas reading, configured alarms and alarm levels
47
between Channel Tile>Channel Summary>Channel
Touchpoint Plus Wireless
Technical Handbook