Canon Booklet Finisher-D1 Service Manual page 130

4
Parts Replacing and Cleaning > Intermediate Process Tray Assembly > Removing the Stack Delivery Upper Roller > Procedure
5) Remove the E-ring [1], and slide the bearing [2] downward.
6) Release the arm [3] to the left, and remove the belt [4].
[2]
[1]
7) Slide the bearing [1] and the washer [2] upward, and move the Stack Delivery Roller Shaft
Unit [3] from the Shaft Support [A].
• 1 E-ring [4]
[4]
[2]
[1]
4 Parts Replacing and Cleaning > Intermediate Process Tray Assembly > Removing the Stack Delivery Upper Roller > Procedure
[3]
[4]
F-4-157
[3]
[A]
F-4-158
8) Remove the Stack Delivery Roller Shaft Unit [1] from the Shaft Support [B].
• 1 Parallel Pin [2]
• 1 Pulley [3]
• 1 Belt Retainer [4]
• 2 Bearings [5]
• 1 Washer [6]
[1]
[B]
9) Remove the E-ring [2] and the bearing [3] from the Stack Delivery Roller [1].
[3]
[2]
4-67
[2]
[3]
[4]
[2]
[3]
[5]
[5]
[4]
[6]
[6]
[5]
[5]
[1]
F-4-159
[1]
F-4-160
4-67