2.4.2 Connectors
The table below lists the connectors on the PG board and the compatible connectors for
wiring:
Receptacle on the Board
Wiring Plug
Connectors
Connector for Wiring to the Cover
If you are using the optional cable, refer to section 2.4.4 PG Terminal Block Pin Outs later
in this chapter.
RC700 / RC90 option PG motion system Rev.2
Individually
pressed-in type
Pressed-in-as-a-whole type
Soldered type
DX10A-100S
(manufacturer: Hirose Electric Co., Ltd.)
DX30-100P (for AWG#30)
DX30A-100P (for AWG#28)
DX31-100P (for AWG#30)
DX31A-100P (for AWG#28)
DX40-100P
DX30M-100-CV1
2. Hardware
13