Honeywell Experion PKS Specifications And Technical Data page 37

EP03-300-200
Release 200
Non-Redundant Controller Configuration (ControlNet Supervisory Network)
TC-CCR013 --
ControlNet Interface
(CNI), Redundant
Media
TC-FPCXX2 --
120/240 VAC
Power Supply
C
Terminators --
o
TC-TCXBNC
n
t
r
o
l
N
e
t
The above example is meant to illustrate typical component model numbers necessary for a small
system with a non-redundant Controller on a ControlNet Supervisory Network (see following pages
for a Redundant ControlNet example and an Ethernet Supervisory Network Configuration example). A
power supply or a redundant power supply chassis adapter always attaches to the left-end of a chassis
and does not use any chassis slots.
The Supervisory ControlNet is a physically separate network from the I/O ControlNet (both shown).
This Supervisory network carries supervisory messages between the Experion PKS Server and
Controllers as well as peer-to-peer messages between controllers. The I/O ControlNet carries messages
between controllers and IOMs. Note that a ControlNet Tap consists of two BNC connectors for trunk
cable connection, an integral 1-meter drop cable, and a BNC connector for ControlNet Interface (CNI)
connection. Several physical models are available to accommodate different mounting layouts.
Other Experion PKS operator stations connect to Experion PKS via a LAN above the server, not via the
Supervisory ControlNet.
Experion PKS CEE-based Controller Specifications and Models
TC-PRS021 -- C200
Control Processor
(Optional) TC-CCR013 --
CNI to connect to other
I/O racks
I/O modules and
terminal blocks
Taps -- 9904-TPS, R,
YS, and YR (4 kinds)
ControlNet Cable (TC- KCCxxx ) -- Supervisory
TC-PCIC01 -- ControlNet
TC-CCR013 -- CNI,
Communication Interface
Redundant Media
Module for PC (redundant
media) (in server)
I/O modules and
terminal blocks
34
December, 2003
TC-FXX102 -- 10-slot rack
Controller
Chassis
LAN Connection --
Ethernet, TCPIP, etc .
Server
(stations not
shown)
Additional
Remote I/O
Version 1.0