Honeywell Experion PKS Specifications And Technical Data page 33

EP03-300-200
Release 200
Table 15. CEE/CPM and CEE/ACE Processing Resources
Minimum Reserved overall CPU to be Maintained During
Runtime (CPUFREEAVG)
CEE type
500 ms CEE - ACE
50 ms CEE – Non Redundant C200 Configuration
50 ms CEE – Redundant Configuration
5 ms CEE – Non Redundant Configuration
1
CPUFREEAVG is not supported on ACE; CPU Usage from Windows Task Manager provides the CPU Resources
used.
2
Available Processing Units at indicated maximum loading cycle percentage. For example, for a 50 ms non-
redundant CEE, users may configure it to use all of the 3600 PU. They must balance the CPU load across all
cycles. Once they have done so, no single cycle should exceed 60% in its CPUCYCLEAVG value.
3
Maximum Cycle Loading: Over cycles 0-39, the Average CPU Usage (CPUCYCLAVG) statistic is not to exceed
the stated maximums.
Table 16. CEE Memory Resources and Block Configuration
MU = Memory Unit = 1 Kbyte = 1024 bytes
Maximum available memory resources
Maximum total number of CMs, SCMs and IOMs configurable per
CEE
Maximum number of component blocks per CM
This maximum number is achievable under nominal operating and monitoring
conditions. The following items may lower the maximum number of FB's that
can be placed in or monitored from a single CM:
•
Monitoring frequently changing values
•
Operating in a redundant system
•
Operating with high quantities of configured peer-to-peer
Maximum number of Steps & Transitions (divided over all
handlers) per SCM
Experion PKS CEE-based Controller Specifications and Models
1
30
December, 2003
Version 1.0
20% - CPM
40% - ACE
2
PU Maximum Maximum
Loading
Cycle
15000 PU/sec 60%
3600 PU/sec 60%
1600 PU/sec 60%
2400 PU/sec 40%
C200/CPM ACE
4000 MU 32000 MU
1000 4000
(IOMs not
supported)
40
160 160
(80
Step/Transition Step/Transition
pairs) pairs)
3
40
(80