Page 1
V-REGI Series Store Support System Standard Package Sales Management System E-mail Remote Control Reference Manual V-R7000 V-R100...
Page 2
Casio. Casio has taken all possible care in producing this manual so it is error-free, however, if you should notice an unclear point, mistake or omission, please do contact us and let us know.
Contents Introduction Introduction ............................4 SECTION 1: Introduction of the E-mail Remote Control..............6 1.1 Outline of the system ............................ 6 1.2 Function list..............................7 SECTION 2: Basic programming of E-mail Remote Control .............. 9 2.1 How to set up E-mail function........................9 2.1.1 Set up an E-mail function..........................
The copyrights for this manual, as well as all rights related to the software noted in this manual are the property of CASIO Computer Co., Ltd. The unauthorized reproduction of this manual in whole or part is prohibited without the express,...
Page 5
Section 1 Introduction of E-mail Remote Control...
SECTION 1: Introduction of the E-mail Remote Control 1.1 Outline of the system E-mail Remote Control can receive an e-mail with specific commands to respond back to the V-REGI with flash sales report within E-mail. Following chart describes E-mail Remote Control functions. Functions of the V-REGI E-mail Remote Control Check mail server to receive an Receive command...
1.2 Function list <Flash sales report> You can receive an e-mail including today’s flash report (Gross sales amount and number of customers) from the V-REGI sales application. <Flash customer report> You can receive an e-mail including today’s total number of registered customers and newly registered customers.
Page 8
SECTION 2 Basic programming of E-mail Remote Control...
SECTION 2: Basic programming of E-mail Remote Control 2.1 How to set up E-mail function Prior to starting this setting, your e-mail account should be available. 2.1.1 Set up an E-mail function ・ Enter e-mail address and password then tap <NEXT> button...
2.1.2 Type of receiving mail server ・ Selecting the type of receiving mail server will change the menu screen...
Page 11
If you need to change the type of server, it is necessary to delete the current settings first then Select desired type of server as explained below. (1) Select Android “Settings”-> “Applications”->”Manage applications”-> “Remote Control by E-mail”-> “Force stop”->”Clear data” then press <OK> (2) Follow above steps but perform “Force stop”...
2.1.3 Detail of receiving mail server ・ Enter required information to the appropriate field and tap <NEXT> ・ After showing certificate, tap <Permission> to connect server for verification.
2.1.4 Detail of sending mail server ・ Enter required information to the appropriate field and tap <NEXT> for verification ・ Tap <NEXT> will be started server check...
2.2 Programming receiving commands 2.2.1 Programming of mail information table(1) You have to make sure that e-mail set up is completed in order to perform setting of mail information table (1). An e-mail receive tray will appear after selecting E-mail Remote control icon. Press and hold display on/off button where located at right side of the V-REGI for few seconds then following three icons will be appeared on your screen.
2.2.2 Programming for E-Mail Information ・ Tick “Use E-mail remote control” ・ V-REGI can be programmed for up to five different e-mail addresses to be received and respond command to send back reports. ・ Upon your completion of all your settings, use <return> key to go back the main menu.
SECTION 3: Commands and Responses 3.1 Commands Following three commands are available on the V-REGI 1. Request flash sales report 2. Request flash customer sales report 3. Request flash reservation report 3.1.1 Contents of sending e-mail Request should be following conditions (single byte code. Never use double byte code) 1.
3.2.1 Contents of responded e-mail 1.Reply e-mail for request of flash sales report Subject Line: “Auto responding e-mail” Email Body: Current gross sales amount and number of customers. Sales Flash Report NET: $875.00 COVERS: 18 ※Sample Image 2. Reply e-mail for request of flash customer report Subject Line: “Auto responding e-mail Email Body: Total number of customer and today’s registered customer Customer Flash Report...
Page 22
CA1510-A Sales Management System E-mail Remote Control Reference Manual...