Advertisement
O
ptional accessories
Distributable ruler assembly(only for domestic)
Vice assembly(only for domestic)
Table set parts.
Saw blade (Same as LS0800, M241): Chip saw(No.210-11B18-teeth), Chip saw(No.210-11C40-teeth), Chip
saw(No.210-11E80-teeth), Combination(No.210-7A30-teeth)
R
epair
* If the up/down motion of the handle becomes heavy due to the insufficient
turning of the ring 8 mounted near the center of the safety cover, repair in
the following orders. Disconnect the + pan head screw M6 and clean the
dust accumulated inside the ring 8 and on the + pan head screw and flat
washer 6, lubricate the oil, and then assemble. Do not strongly fasten the
screw in this case, which may potentially damage the female screw. The
screw should be fastened in a degree like fastening the normal M4
screw.(fastening torque : 10-15 kgf-cm)
* Others are same as LS0800, M241.
Safety cover
Flat washer6
Ring 8
+ pan head screw M6
Advertisement
