Application - Honeywell KromSchroder IC 40 Technical Information

Application

1 Application
Actuator IC 40 is designed for all applications that re-
quire precise, controlled rotary movement between 0°
and 90°. It can be mounted directly onto the butterfly
valves BVG, BVGF, BVA, BVAF, BVH, BVHS or linear flow
control VFC in order to control the gas and air flow rates
on gas burners.
Actuators and butterfly valves or linear flow control
VFC can also be delivered ready assembled as butter-
fly valves with actuator IBG, IBGF, IBA, IBAF, IBH, IBHS
or linear flow control IFC, see Technical Information
Butterfly valves BVG, BVA, BVH..., IB..., and Linear flow
controls VFC, IFC.
IBG (IC 40 + BVG)
An optional integrated feedback potentiometer offers
the option of monitoring the current position of the ac-
tuator. This checking function can be used in automa-
tion processes.
IC 40 · Edition 07.18
IFC (IC 40 + VFC)
The IC 40 can be used on continuously-controlled
burners and on stage-controlled burners.
Settings on the actuator IC 40 can be made using a PC
with the programming software BCSoft. All the relevant
settings for the process are made using the software
via an optical interface. Various operating modes, which
may be modified, are stored in the unit. In addition, the
control type (two-point step signal, three-point step
signal or continuous control), running times, adjust-
ment angles and intermediate positions can be pro-
grammed.
The actuator can also be controlled "by hand" using the
software.
Once set, all the parameters can be saved on the PC
and copied from there into other actuators, thus saving
time during the commissioning process.
Service technicians can call up statistical data using
BCSoft, such as hours of operation, actuating cycles
and a fault history. Some values can also be set to zero,
for example to record data over a specific period of time.
4