Makita DSC121 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Power Tool
  5. DSC121
  6. Instruction manual

Makita DSC121 Instruction Manual

Cordless threaded rod cutter
Hide thumbs Also See for DSC121:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Cordless Threaded Rod Cutter
DSC121
Read before use.

Advertisement

Table of Contents
loading

Related Manuals for Makita DSC121

Summary of Contents for Makita DSC121

  • Page 1 INSTRUCTION MANUAL Cordless Threaded Rod Cutter DSC121 Read before use.

  • Page 2: Specifications

    SPECIFICATIONS Model: DSC121 Cutting capacities M8, M10, M12, W5/16, W3/8, W1/2 Cutting speed Approximately 3 seconds Dimensions (L x W x H) 212 mm x 323 mm x 260 mm (with handle) Rated voltage D.C. 18 V Net weight 6.0 kg (with BL1860B battery cartridge, without balance stand) •...

  • Page 3: Ec Declaration Of Conformity

    Do not abuse the cord. Never use the cord for WARNING: The vibration emission during carrying, pulling or unplugging the power tool. actual use of the power tool can differ from the Keep cord away from heat, oil, sharp edges declared value(s) depending on the ways in which or moving parts.
  • Page 4 Battery tool use and care Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically desig- nated battery packs. Use of any other battery packs may create a risk of injury and fire.
  • Page 5 Important safety instructions for have been altered, may result in the battery bursting causing fires, personal injury and damage. It will battery cartridge also void the Makita warranty for the Makita tool and charger. Before using battery cartridge, read all instruc- tions and cautionary markings on (1) battery...

  • Page 6: Parts Description

    PARTS DESCRIPTION Cutting die H Cutting die R Return bulb knob Handle Battery cartridge Cutter head Balance stand Pump Motor Cutting die type Type Cutter head (Cutting die H) Cutter rod (Cutting die R) M10H M10R M12H M12R W5/16 W5/16H W5/16R W3/8 W3/8H...

  • Page 7: Functional Description

    Overload protection FUNCTIONAL When the tool/battery is operated in a manner that DESCRIPTION causes it to draw an abnormally high current, the tool automatically stops. In this situation, turn the tool off and stop the application that caused the tool to become CAUTION: Always be sure that the tool is overloaded.
  • Page 8 ► 1 . Leveler sack cover 2. Balance stand even with a recharged battery cartridge, cool down the bat- tery cartridge fully. If the status will not change, stop using and have the tool repaired by a Makita local service center. 8 ENGLISH...

  • Page 9: Operation

    ASSEMBLY OPERATION CAUTION: WARNING: Always be sure that the tool is The following types of cutting switched off and the battery cartridge is removed may result in cutting dies or components break- ing and flying off. Since this causes serious acci- before carrying out any work on the tool.

  • Page 10: Maintenance

    If oil overflows, immediately wipe off any excess oil. ► 1 . Cutting die H 2. Threaded rod 3. Cutting die R NOTE: Use only Makita Hydraulic Oil or JX Nikko 4. Thickness of the cutting die (13 mm (33/64″)) 5. Cut length (13 mm (33/64″) or more) Nisseki Energy Super Highland #46 oil. Do not use any other type of oil in this tool.
  • Page 12 Jan-Baptist Vinkstraat 2, Makita Europe N.V. 3070 Kortenberg, Belgium 3-11-8, Sumiyoshi-cho, Makita Corporation Anjo, Aichi 446-8502 Japan DSC121- ENEU-1803 www.makita.com 20190225...

Table of Contents