Feature Ospf - Cisco Nexus 3548 Command Reference Manual

feature ospf

feature ospf
To enable the Open Shortest Path First Protocol (OSPF), use the feature ospf command. To disable
OSPF, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default Disabled
Command Modes Global configuration mode
Command History Release
5.0(3)A1(1)
Usage Guidelines You must enable the OSPF feature before you can configure OSPF.
This command requires the LAN Base Services license.
Examples This example shows how to enable the OSPF feature:
switch# configure terminal
switch(config)# feature ospf
switch(config)#
This example shows how to disable the OSPF feature:
switch# configure terminal
switch(config)# no feature ospf
switch(config)#
Related Commands Command
show feature
show ospf
router ospf
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
128
feature ospf
no feature ospf
Modified
This command was introduced.
Description
Displays the status of features on a switch.
Displays OSPF configuration information.
Creates an OSPF instance.
Chapter Unicast Routing Commands
OL-27852-01