Chapter
Unicast Routing Commands
clear vrrp
To clear the Virtual Router Redundancy Protocol (VRRP) statistics, use the clear vrrp command.
Syntax Description
vr id
interface
ethernet slot/port
port-channel number
sub_if-number
Command Default
None
Command Modes
Any command mode
Command History
Release
5.0(3)A1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to clear VRRP statistics from a specific Ethernet interface:
switch# clear vrrp vr 1 interface ethernet 1/5
switch#
Related Commands
Command
feature vrrp
OL-27852-01
clear vrrp vr id interface {ethernet slot/port | port-channel number[.sub_if_number]}
Modification
This command was introduced.
Description
Enables the VRRP feature.
Clears VRRP statistics in a VRRP group on an interface. The range
is from 1 to 255.
Specifies the interface whose statistics need to be cleared.
Clears VRRP statistics on the Ethernet interface. The slot number is
from 1 to 255, and the port number is from 1 to 128.
Clears VRRP statistics on the EtherChannel interface. The
EtherChannel number is from 1 to 4096.
(Optional) Subinterface number. The range is from 1 to 4093.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
clear vrrp
95