Serial Port Connector - Debug (J2); Ethernet Connector - 10Baset (J3); Table 5-3. Debug (J2) Connector Pin Assignments; Table 5-4. 10/100 Baset (J3) Connector Pin Assignments - Motorola MVME2300SC Series Installation And Use Manual

Pin Assignments

Serial Port Connector - DEBUG (J2)

5

Ethernet Connector - 10BASET (J3)

Table 5-4. 10/100 BASET (J3) Connector Pin Assignments

5-4
A standard Micro D9 connector located on the front panel of the
MVME2300SC provides the interface to the asynchronous serial debug
port. The pin assignments for this connector are as follows:

Table 5-3. DEBUG (J2) Connector Pin Assignments

The 10BaseT/100BaseTx connector is an RJ45 connector located on the
front panel of the MVME2300SC. The pin assignments for this connector
are as follows:
1 DCD_EXT
2 RD_EXT
3 TD_EXT
4 DTR_EXT
5 Ground
6 DSR_EXT
7 RTS_EXT
8 CTS_EXT
9 RT_EXT
1 TD+
2 TD–
3 RD+
4 No Connection
5 No Connection
6 RD–
7 No Connection
8 No Connection
Computer Group Literature Center Web Site