Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Base
DISASSEMBLING
Base is joined to Motor section and Saw section with the following screws and nuts:
*at Hinge portion: Pan head screw M5, Hex lock nut M5-8
*at Depth guide portion: Flat head square neck bolt M6x75, Hex nut M6
Remove them in the order of Fig. 2, 3, 4.
Fig. 2
Turn Safety cover in the direction of the arrow
to obtain enough space for you to remove
Rubber sleeve 6.
Keeping Safety cover in the position,
remove Sleeve 4 and Rubber sleeve 6 from Blade case
by unscrewing Tapping screw 4x25.
Fig. 3
Handle and Motor housing
viewed from Motor housing side
Safety cover
Hex lock nut M5-8
Pan head screw M5
For easy removal of Hex nut M6, loosen Hex nut M6
using Lever 40 as a wrench before removing Lever 40.
Remove Hex lock nut M5-8 from Pan head
screw M5.
Rubber sleeve 6
Sleeve 4
Tapping screw 4x25
Flat head square neck bolt M6x75
Pipe 6
Flat washer 6
Hex nut M6
Lever 40
Stop ring E-8
Safety cover
Fig. 4
Base
Flat head square
neck bolt M6x75
P 3 /14
Pan head screw M5
Advertisement
