Ac Power Cable - Epson RC700 Manual

3.3.2 AC Power Cable

Make sure that operations are done by a qualified personal.

Be sure to connect the earth wire (green/yellow) of the AC power cable to the

earth terminal of the factory power supply. The equipment must be grounded
properly at all times to avoid the risk of electric shock.
 Always use a power plug or a disconnecting device for power connecting cable.
WARNING
Never connect the Controller directly to the factory power supply.
Select the plug or a disconnecting device which conform safety standards for

nations.
Make sure to insert the plug of the AC power cable firmly when connecting to the
Controller.
AC power wire (2 cables)
Ground wire
Cable length
Terminal
RC700 / RC700-A Rev.23
Item
Black, Black
or Black, White
Green / Yellow
3 m
M4 round solderless terminal
Specification
Safety 3. Installation
29