Makita HM1202 Technical Information page 10

P 10 / 14
The parts to be greased
The parts to be greased are marked with
(1) The parts to be greased with MAKTA grease No.00.
Impact bolt : Inner side of O ring, Out side of fluoride ring 28,
Whole part of impact bolt.
Fluoride ring 28
O ring
Striker : O ring 34,
Whole part of striker
Striker
O ring 34
Piston : O ring 34,
Whole part of piston
O ring 34,
Piston
Rod : Inside of the holes where piston pin
and crank shaft are installed.
Oil seal 17 : Whole of inside