Wireless Receiver Box (T3R Only) - Honeywell T3 User Manual

Wireless Receiver Box (T3R only)

8
The T3R Thermostat communicates wirelessly to the Receiver Box which is wired to
the boiler. If the Thermostat loses wireless communication or becomes faulty, the
boiler can be switched on or off manually using the button on the Receiver Box.
• is displayed on the Thermostat when the wireless signal is
good - The receiver box
• + will flash on the Thermostat when the wireless signal
is lost - The Receiver Box
• If communication is lost move the Thermostat to another
location to try and restore communication.
To manually override the boiler using the Receiver Box:
1. Press the button once to switch the boiler ON or OFF. The button LED should be:
- Solid GREEN when the boiler is ON.
- Off when the boiler is OFF.
LED will be solid GREEN.
LED will flash RED.
Press the button once to toggle
boiler ON or OFF (leave at least
3 sec between each button press).
19
Do not press the small reset
'pinhole' button as this will
clear the receiver box binding
data and disrupt the operation
of the heating system.