Retrieving A Held Call; Tone Override; Proprietary Phone Programming; Off Hook Ringing Assignment - NEC Ranger AK Manual

•
Press the LNR/SPD button and dial 00-19 for Station Speed Dial, dial 20-99
for System Speed Dial, or # for Last Number Redial
If your station is equipped for "Prime Line Access", then you may not be required to
select an outside line.

Retrieving a Held Call

o To retrieve a held call, do the following
o Press flashing line key
OR
o Press CNF if the call was an internal call

Tone Override

If you call an extension and receive call waiting, you can use "Tone Override" to
tell them that you are waiting. To use tone override, do the following:
Receive call waiting tone
o Press * to send tone override
o Wait for the called extension to become idle or to answer
To answer:
o With a call in progress, receive a tone override
o Press the HOLD button, converse.

Proprietary Phone Programming

This section covers programming your proprietary phone for various features.
Please note that all programming must be done with the station "idle" unless specified
otherwise. Idle means that the station is not in use and the receiver is in the "on hook"
position.

Off Hook Ringing Assignment

This setting determines whether or not your telephone will ring on an incoming call if
you are already talking on the phone.
10