Wiring Diagram - Makita Makstar BVR340 Technical Information

W
iring diagram
Connect Lead wires (red, white) to Switch as
illustrated below. Be sure that the center line of
each Insulated terminal is positioned inside of
the center of each screw hole.
Switch
center of screw hole
Insulated terminal
Switch
Connect Lead wires (red, black)
to Terminal as illustrated below.
Flag connector
Terminal
Terminal
Connect Flag receptacles to the terminals on DC Motor
as illustrated below.
Note: Connect the Flag receptacle on Lead wire (white)
to the terminal with a red mark.
Lead wire (white)
DC Motor
Lead wire (white)
Route lead wire (white) between
this rib and the wall of Housing.
rib
P 6/ 6
red mark
Flag receptacle
Lead wire (black)