Bluetooth Commands; Bt-Pair; Bt-Unpair; Bt-Disconnect - Yamaha CS-700 Series Integrators Reference Manual

Supported Products: CS700-AV, CS700-SP
Available in API Version: 1.0
5.2.4.3

Bluetooth Commands

bt-pair

Description: Initiate Bluetooth pairing mode from the device in order to pair a phone.
Command Definition:
Action Definition
execute bt-pair <0|1>
Parameters:
Parameter Description
0
Cancel pairing
1
Initiate pairing
CLI Format Examples:
bt-pair 1
Supported Products: CS700-AV, CS700-SP
Available in API Version: 1.0

bt-unpair

Description: Remove all Bluetooth devices in the paired devices list. If a device is connected, it will be
disconnected.
Command Definition:
Action Definition
Execute bt-unpair <all>
Parameters:
Parameter Description
All
Remove all paired devices
CLI Format Examples:
bt-unpair all
Supported Products: CS700-AV, CS700-SP
Available in API Version: 1.0

bt-disconnect

Yamaha CS-700 Integrators Reference Guide 74