Making Necessary Initial Settings; Activating Hdmi Connection/Displaylink Function/Bluetooth/Usb Audio; Installing The Displaylink® Driver Onto Your Computer - Yamaha CS-500 User Manual

Making necessary initial settings

 Activating HDMI connection/DisplayLink function/Bluetooth/USB audio
In order to use this device, activate the functions as described below. Be sure to follow the procedure below before using
this device.
NOTE
• Before performing the following operation, pair the device and remote control (Page 22).
• When this device is used as a webcam (Page 19), this operation is not necessary.
1.
Long-press the menu button and camera preset 2 button on the remote control for at least 3
seconds.
Configuration is finished after the status indicator on the front panel of the device flashes in orange five times at a
0.5-second interval.
 Installing the DisplayLink
In order to display the computer screen on a TV, it may be necessary to install the DisplayLink driver (DisplayLink Manager
on a Mac). If the computer screen is not displayed on the TV, even after checking the following, install the DisplayLink driver.
• The device and TV are connected with an HDMI cable.
• The TV input is correctly set.
• The display settings of the computer are set to "duplicate" or "extend" the display.
• The operation described in "Making necessary initial settings" (Page 23) has been performed.
• DisplayLink has been activated in Yamaha CS Manager. (Page 43)
Download the latest DisplayLink driver from the following website.
(The following website is not operated by Yamaha Corporation.)
 DisplayLink driver download page
https://displaylink.com/downloads
®
driver onto your computer
CS-500 User Guide
23
Setup and connections