Makita LH1040 Technical Information page 18

W
iring diagram
under Housing Cover
Housing cover
Motor housing
Field
Terminal block
Motor housing
Soft start circuit
Rib
Insulated connector
Do not push insulated connector
into motor housing through the
punched hole.
Lead holder
Lead wire of soft start
circuit has to be held
with the lead holder.
Varnish tetron
tube
Varnish tetron
tube
Lead wire of
soft start circuit
Punched hole
The lead wires which are put
on the edge of field, have to
be bundled with varnish tetron
tubes by separating in two groups.
And max. four lead wires have to
be in each bundle.
P 18 /20