Icons; Assembly Mounting The Lt1000; Mounting The Lt1000 To The Seesnake Mini Reel - RIDGID SeeSnake LT1000 Manual

SeeSnake
Platform Wings Extended
Laptop Platform
Platform
Wing
18V
Battery
Mounting
Brackets
Figure 2 – LT1000 Components
Photo
Photo Arrow
Video Tag
Key Keys
Key Key
Autolog
Select
Key
Key
Job
Management
Playback
Key
Key
Figure 3 –LT1000 Keypad

Icons

Do not sit on the LT1000.
Do not stand on the LT1000.
Assembly
Mounting the LT1000
The LT1000 mounts to any Standard or Mini SeeSnake
reel quickly and easily. Assembly requires a Phillips
head screwdriver and a 7 /
sequence for the SeeSnake Mini is different than the se-
quence for the SeeSnake Standard.
Note that for the Standard SeeSnake reel, the curved
portions of the mounting brackets are oriented to the out-
side of the LT1000 while for the Mini's narrower frame,
the curved portions of the brackets point inward.
6
® LT1000
Platform
Wing
Side Plate
SeeSnake
System
Cable
Menu Brightness Microphone
Key Key Mute Key
Sonde
Power
Zero
Key
Key
Key
Image
Flip Key
" box wrench. The mounting
16
Mounting the LT1000 to the SeeSnake
Mini Reel
1. Remove the two mounting brackets from the sides of
the LT1000.
2. Before mounting the LT1000 on the frame, lead the
SeeSnake System Cable up to the SeeSnake System
Connector. The SeeSnake System Cable has a guide
ridge molded into the top of the cable connector.
With the guide ridge aligned with the guide pin at the
top of the receptacle, insert the System Cable into the
System Connector firmly and turn the locking sleeve
clockwise to tighten it in position.
When connecting/disconnecting the SeeSnake
NOTICE
system cable, turn only the locking sleeve. To prevent
damage, do not bend or twist the connector or cable.
Guide
Locking
Sleeve
Figure 4 – Connecting System Cable Before Mounting
3. The Mini SeeSnake has the curved portions of the
mounting brackets face inward. Position the LT1000
with the opening in the side plate seated over the
"foot" on the SeeSnake Reel frame and hold it in its
approximate position while starting the attaching
machine screws on one side of the LT1000. The
SeeSnake may be laid on its back for easier instal-
lation of the front side panel.
Figure 5 – First Machine Screw