Modification Of E, F, 7 Page Data - Sony HANDYCAM DCR-TRV130E Service Manual

1-2-2. INITIALIZATION OF E, F, 7 PAGE DATA
1. Initializing the E, F, 7 Page Data
Note1: If "Initializing the E, F, 7 Page Data" is performed, all data of the
E page, F page and 7 page will be initialized. (It is impossible to
initialize a single page.)
Note2: If the E, F, 7 page data has been initialized, following adjustments
need to be performed again.

1) Modification of E, F, 7 page data

2) Camera system adjustments
3) Servo and RF system adjustments
4) Video system adjustments
5) IR transmitter adjustments
Adjusting page F
Adjusting Address 10 to FF
Adjusting page E
Adjusting Address 00 to FF
Adjusting page 7
Adjusting Address 00 to FF
Note: NTSC model: DCR-TRV130
PAL model: DCR-TRV130E
Initializing Method:
Order Page Address Data
1 0 01 01
2 6 00
3 6 01
4 6 02
5
2. Modification of E, F, 7 Page Data
If the E, F, 7 page data has been initialized, change the data of the
"Fixed data-2" address shown in the following table by manual input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the camcorder may
not operate.
3) When changing the data, press the PAUSE button of the
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Procedure
Set the data.
Set the following data.
55: NTSC model
51: PAL model
Set the following data, and press
PAUSE button.
55: NTSC model
51: PAL model
Check that the data changes to
"01".
Perform "Modification of E, F, 7
Page Data".
Processing after Completing Modification of E, F, 7 Page data
Order Page Address Data
1 2 00
2 2 01
3. F Page Table
Note: Fixed data-1: Initialized data. (Refer to "1. Initializing the E, F, 7
Page Data".)
Fixed data-2: Modified data. (Refer to "2. Modification of E, F, 7
Page Data".)
Initial value
Address
NTSC PAL
00 to 0F
10 to 27
28
29 to 37
38 68 68
39 80 80
3A 8D 8D
3B
3C 80 80
3D 7A 7A
3E 2B 2B
3F 80 80
40 65 65
41 80 80
42 8D 8D
43 87 87
44 to 46
47 33 33
48
49 34 34
4A to 4C
4D 8C 8C
4E 28 28
4F 07 07
50 3A 3A
51 4A 4A
52 12 12
53 0B 0B
54 54 54
55 00 00
56 19 19
57 00 00
58 37 37
59 00 00
5A 00 00
5B 04 04
5C 00 00
5D 00 00
5E 51 75
5F 4A 5A
60
61 00 00
62 to 63
5-11
Procedure
29 Set the data
29 Set the data, and press the PAUSE
button.
Remark
Fixed data-1
Fixed data-2
Fixed data-1
HALL adj.
Fixed data-2
Auto white balance & LV standard
data Input
Auto white balance adj.
Fixed data-1
Color reproduction adj.
Fixed data-1
Color reproduction adj.
Fixed data-1
27MHz origin osc. adj.
Flange back Adj.
Angular velocity sensor sensitivity adj.
Fixed data-1
Flange back Adj.
Fixed data-1