Peaking Control - Sony Digital Betacam DVW-700 Operation Manual

1 Viewfinder
The viewfinder lets you view the camera image in black and white while
shooting the picture and also see the playback picture from the VTR. It
2
also displays various warnings and other information, a zebra pattern
safety zone marker
2 BRIGHT (brightness) control
This control adjusts the picture brightness on the viewfinder screen. It
has no effect on the camera output signal.
3 CONTRAST control
This control adjusts the picture contrast on the viewfinder screen. It has
no effect on the camera output signal.

4 PEAKING control

This control adjusts the sharpness of the picture on the viewfinder screen
to make focusing easier. It has no effect on the camera output signal.
....................................................................................................................................
1) Zebra pattern
The zebra pattern aids in manual iris adjustment by indicating areas of the
picture where the video level is approximately 70 % IRE (for the DVW-700 /
700WS) or 490 mV (for the DVW-700P / 700WSP).
2) Safety zone marker
The safety zone marker is a rectangle indicating the effective picture area which
is equivalent to 80 % or 90 % (the factory setting) of the entire viewfinder
screen area. A setup menu lets you change the effective picture area from 90 %
to 80 %.
For more information, see Section 4-8-4 "Setting the Marker Display" (page 4-
59).
3) Center marker
The center marker indicates the center of the picture with a crosshair.
2-16
Chapter 2 Locations and Functions of Parts and Controls
2)
, and center marker
3)
.
1)
,