Using An Ac Adaptor - Sony Digital Betacam DVW-700 Operation Manual

Continuous operation when operating with only an internal
battery pack
First, connect a fully charged external battery to the DC IN connector,
then change the internal battery.
Notes
• Whenever an internal battery pack is loaded and an external battery is
connected to the DC IN connector, the external battery is always used
as the power source.
• There may be some noise on the video signal at the instant the power
sources are switched.
5

5-1-5 Using an AC Adaptor

Connect the camcorder through an AC-550 / 550CE AC Adaptor as
illustrated, then turn on the AC adaptor power switch.
5-8
Chapter 5 Setting Up the Camcorder
AC-550 / 550CE
AC Adaptor
DC IN
DC output cable (supplied with the AC-550 / 550CE)
Using an AC Adaptor
Wall outlet
Power switch on
DC OUT