Setting The Camera Id - Sony Digital Betacam DVW-700 Operation Manual

Note that the CANCEL and PRESET functions can also be used for
the SAFETY AREA, CENTER H, and CENTER V selections.
If the MENU CANCEL / PRST / ITEM switch is pressed twice to
CANCEL / PRST, all the previous settings are canceled. If the
switch is pressed twice more to CANCEL / PRST, the settings are
reset to their initial values.
5
To end the menu operation, return the MENU ON / OFF / PAGE
switch to OFF.
The setup menu disappears from the viewfinder screen and the
displays indicating the current status of the camcorder appear along
the top and bottom of the viewfinder.

4-8-5 Setting the Camera ID

A camera ID of up to 10 alphanumeric characters, symbols, and spaces
can be set on the CAMERA ID page of the setup menu. If the OUTPUT /
DCC selector is set to BARS, DCC OFF, the camera ID is output
together with the color bar signal.
Notes
• When displaying the camera ID, select ENC from the TEST OUT page
of the setup menu so that a composite signal can be output from the
TEST OUT connector.
For information about the TEST OUT page, see Section 4-9-3 "Selecting the Test
Output" (page 4-72).
• When the setup menu is displayed, the camera ID is not displayed even
if the color bar signal is output.
Chapter 4 Adjustments and Settings for Recording
4
4-61