Status Display On The Viewfinder Screen; Screen - Sony Digital Betacam DVW-700 Operation Manual

4-8 Status Display on the
Viewfinder Screen
The viewfinder screen displays not only the video picture but also
characters and messages indicating the camcorder settings and operating
status, a center marker, a safety zone marker, etc.
When the MENU ON / OFF / PAGE switch is set to OFF, the items set
to ON by related switches and the VF DISPLAY page of the setup menu
appear along the top and bottom of the screen. The messages that give
details of the settings and adjustment progress and results can also be
4
made to appear for about 3 seconds while settings are being changed,
during adjustment, and after adjustment.
For information about the display item selection, see Section 4-8-2 "Selecting the
Display Items" (page 4-54); for information about setting change and adjustment
progress messages, see Section 4-8-3 "Display Mode and Setting Change and
Adjustment Progress Messages" (page 4-57); and for information about marker
display, see Section 4-8-4 "Setting the Marker Display" (page 4-59).
4-49
Chapter 4 Adjustments and Settings for Recording