Cisco UCS B440 Installation And Service Note

S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m
Cisco UCS B440 High Performance Blade Server
Installation and Service Note
(N20-B6740-2)
The Cisco UCS B440 High Performance Blade Servers (shown in
industry-standard server technologies and provide the following:
Up to four Intel Xeon 7500 Series processors
•
Four optional front-accessible, hot-swappable SAS hard drives
•
Support for up to two dual-port adapter card connections for up to 40 Gbps of redundant I/O
•
throughput
Industry-standard double-data-rate 3 (DDR3) memory, supporting up to 32 DIMM slots and up to
•
256 GB of memory
Remote management through an integrated service processor that also executes policy established
•
in Cisco UCS Manager software
• Local keyboard, video, and mouse (KVM) access through a front console port on each server
Out-of-band access by remote KVM, Secure Shell (SSH) Protocol, and virtual media (vMedia) as
•
well as Intelligent Platform Management Interface (IPMI)
• LSI RoC 6G SAS 2108 RAID Controller (onboard version of LSI MegaRAID 9260), with Battery
Back-up option and write back cache
M1 and M2 versions are available, supporting different processor classes.
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Figure 1) are based on