Cisco UCS 5100 Configuration page 3
Kvm console access
Hide thumbs
Also See for UCS 5100:
- Setup (17 pages) ,
- Firmware manual (10 pages) ,
- Upgrade instructions (10 pages)
Advertisement
4.
Enter the appropriate information in order to create the block of IP addresses, and then click OK.
Note: The IP addresses in the block must be routable outside.
UCS Manager CLI
Complete these steps in order to use the UCS CLI to configure KVM console access to the blade server:
1.
Enter org mode.
2.
Enter ip−pool and then ext−mgmt mode.
3.
Enter the pool ip address block.
4.
Commit transaction.
Power−A#
Power−A#
Power−A#scope org
Power−A /org #scope ip−pool ext−mgmt
Power−A /org/ip−pool #scope pooled 10.193.35.200
Power−A
Advertisement
