To Check The Ethernet Information - Hitachi HIDIC EH-150 Applications Manual

Sample program 2
R7E3
R1
R111
R112
Chapter 5 Configuration and procedure for starting communication

To check the Ethernet information

WR013 = H1
WR014 = H200
ADRIO = (WR015, R110)
ADRIO = (WR016, WM140)
WR017 = 54
R110
FUN200 (WR010)
R1 = 0
R1 = 0
To set S parameter area
(00001)
The request of Ethernet information getting
To set the target area (Unit 0, Slot 2)
To configure R110 as the control bit I/O No.
To configure WM140 as the starting area of destination
To configure 54 words for sending size
(00002)
To set execution bit by setting R0 = 1.
(00003) FUN200 command execution
(00004)
The process of normal completion
(00005)
The process of error completion
5-18
Slot No. 0 1 2
EH-ETH
- - *