Identification (Front) - Grizzly G0841 Owner's Manual

Become familiar with the names and locations of the controls and features shown below to better understand
the instructions in this manual.
Lower
Cutterhead
Lower Cutterhead
Carriage
Headstock Elevation
Chain Tensioner
Like all machinery there is potential danger
when operating this machine. Accidents
are frequently caused by lack of familiarity
or failure to pay attention. Use this machine
with respect and caution to decrease the
risk of operator injury. If normal safety pre-
cautions are overlooked or ignored, seri-
ous personal injury may occur.
Model G0841 (Mfd. Since 06/18)

Identification (Front)

Feed Rate Feed Track Tension Lever
Dial w/Scale & Lock Lever
Upper Cutterhead Depth-
of-Cut Scale (1 of 2)
Lower Cutterhead
Depth-of-Cut Scale
No list of safety guidelines can be com-
plete. Every shop environment is different.
Always consider safety first, as it applies
to your individual working conditions. Use
this and other machinery with caution and
respect. Failure to do so could result in
serious personal injury, damage to equip-
ment, or poor work results.
Power
Lamp
Control Panel
Infeed Safety Guard
w/Emergency Stop
Plate
Feed Track
Tensioner (1 of 2)
Infeed
Table
One-Shot Oiler
w/Reservoir
Infeed Table
Handwheel
Headstock Height
Switch (1 of 2)
Headstock Height
Handwheel
-3-