Configuring Mstp Per-Port Parameters - HP 3500 Series Advanced Traffic Management Manual

Multiple Instance Spanning-Tree Operation
Configuring MSTP
3-24

Configuring MSTP Per-Port Parameters

In an MSTP topology, you configure per-port parameters in the global config-
uration context.
In most cases, HP recommends that you use the default settings for these
parameters and apply changes on a per-port basis only where a non-default
setting is clearly indicated by the circumstances of individual links. Some port
parameters (such as admin-edge-port) affect all MSTI instances that consist of
VLANs configured on the port; other port parameters (such as path-cost) affect
only the specified MST.
Per Port Command
spanning-tree < port-list >
admin-edge-port
auto-edge-port
bpdu-filter
bpdu-protection
hello-time < global | 1..10 >
mcheck
path-cost < auto | 200000000 >
point-to-point-mac < force-true | force-false | auto>
priority <priority-multiplier>
pvst-filter
pvst-protection
root-guard
tcn-guard
Page
below
3-25
3-28
3-30
3-25
3-26
3-38
3-23
3-23
3-34
3-32
3-27
3-28