Configuring The Site-To-Site Vpn; Starting Asdm; C H A P T E R 8 Scenario: Site-To-Site Vpn Configuration - Cisco ASA 5505 Getting Started Manual

Chapter 8 Scenario: Site-to-Site VPN Configuration

Configuring the Site-to-Site VPN

Starting ASDM

78-17612-01
This section describes how to use the ASDM VPN Wizard to configure the
adaptive security appliance for a site-to-site VPN.
This section includes the following topics:
• Starting ASDM, page 8-3
Configuring the Security Appliance at the Local Site, page 8-4
•
Providing Information About the Remote VPN Peer, page 8-6
•
Configuring the IKE Policy, page 8-7
•
Configuring IPsec Encryption and Authentication Parameters, page 8-9
•
Specifying Hosts and Networks, page 8-10
•
Viewing VPN Attributes and Completing the Wizard, page 8-11
•
The following sections provide detailed instructions for how to perform each
configuration step.
To run ASDM in a web browser, enter the factory default IP address in the address
field: https://192.168.1.1/admin/.
Remember to add the "s" in "https" or the connection fails. HTTP over
Note
SSL (HTTPS) provides a secure connection between your browser and
the adaptive security appliance.
The Main ASDM window appears.
Implementing the Site-to-Site Scenario
Cisco ASA 5505 Getting Started Guide
8-3