Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Related Manuals for Smeg 155620
Summary of Contents for Smeg 155620
- Page 1 Instructions for Use Washing machine...
-
Page 2: Table Of Contents
Thank you for your confidence in purchasing our washing machine, and congratulations on the excellent choice. Your new washing machine meets the requirements of modern treatment of laundry. It is rational in the consumption of energy, water and washing agents. Our appliances are friendly to the environment. -
Page 3: Description Of Washing Machine
Description of washing machine 1. Front panel 2. Detergent dispenser 3. Door (depending on the model) 4. Filter lid Technical information 5. Adjustable legs 6. Water outlet hose 7. Water inlet hose 8. Mains power cable • Model (WA63xxx, WA64xxx) Dimensions (w x d x h): 600 mm x 600 mm x 850 mm Depth with door open: 106 cm... -
Page 4: Cautions
Cautions • Be sure to remove transport brackets prior first use of the appliance. Attempted operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer’s warranty! • When connecting your washing machine to water supply, be sure to use brand new water inlet hose and appropriate sealing gaskets (attached). - Page 5 • Before any transport block the machine by inserting at least one transport blocking rod. Prior this operation disconnect the appliance from the mains power! • Rating plate with basic information is located above the opening of the machine. Before connecting the appliance read these instructions carefully.
-
Page 6: Installation And Connection
Installation and connection Package removal Removal of transport brackets In removing the wrapping be careful not to damage the appliance with a sharp object. • Our appliances are packed in environmentally friendly materials which may be recycled, deposited or decomposed without any threat to the environment. - Page 7 Leveling the appliance Water inlet connection • Put the appliance in horizontal position by turning the adjustable legs. The legs are adjustable up to +/- 1 cm. The floor below the appliance should have concrete base, and must be dry and clean, otherwise the appliance may slide.
- Page 8 Water outlet connection Connect the appliance to the mains supply Partial Aqua-stop (water stop system) In case of damage on the interior pipe, leaking is prevented by automatic closing system which stops water inlet to the machine. In such cases display A turns red.
- Page 9 The wall socket must be accessible at all times and must be equipped with an earth lead (in accordance with the local safety regulations). The permanent connection must be fitted by an authorized personnel only. Damaged mains power cable may be replaced only by the producer or his authorized personnel.
-
Page 10: Operation
Operation A - program selector B - MENU knob C - SELECTION knob D - short program knob E - easy ironing knob Program selector Functional knobs Knob B (MENU) - Use this knob to scroll around main menu. Knob C (SELECTION) - Use this knob to scroll around main menu. Knob F (START/PAUSE) - Use it to start or finish the program. - Page 11 Before first use Washing procedure - Selecting language To change the language in which the information appear on the display, press simultaneously the key MENU (B) and SELECTION(C), and turn the program selector (A) from position “0” to the first program in clockwise direction (Cotton 95°C).
-
Page 12: Additional Functions
Washing machine operation symbols on the last page of these instructions). - Load the laundry into the drum. Check that the drum is empty. - Close the door of the appliance. - Open the water inlet faucet. - Switch the machine on. 1. - Page 13 selector (A) to the desired program. The display indicates the selected program, along with basic settings. With each basic program you may also select additional functions. Cotton: whites/colored Normally stained cotton and flax bed linen and underwear, table cloth, bathroom towels, top garments, etc.
- Page 14 Special program for washing normally stained colored laundry made from various resistant fabrics at 40°C. - Selection of additional function The display always indicates only the menus with functions which are available for a particular program. Certain functions may not be selected at the same time (see Program /Additional Functions Chart).
- Page 15 in bold (spin RPM, extra rinse, more water, sound signal). Using the SELECTION knob (C) you may change settings. Activation of a particular function is confirmed by the relevant symbol appearing on the display. Function is deactivated by another pressing the SELECTION knob (C).
-
Page 16: Cotton
for certain programs this function is available also for washing. Appropriately larger quantity of water is indicated by the display. Cold wash For washing less soiled or colour-sensitive clothes. Upon switching this function ON, the heating function of this cycle is switched OFF, therefore the whole program is adequately shortened. - Page 17 SELECTION knob (C) on programs for cotton, synthetics, delicate and mixed laundry. Soaking This program is intended for removal of stubborn stains. In default setting the soaking function is off. It is engaged by pressing the SELECTION knob (C). Soaking time may be set from 1 h to maximum 6 hours, in 30 minute steps.
- Page 18 If you switch the sound signal off the display indicates relevant symbol Child protection Operation of the washer may be protected against accidental changes of programs or functions. The function is activated by pressing the START/PAUSE button (F).
- Page 19 Permanent disengagement of the function: a.) During the operation: - Keep the MENU knob (B) pressed for 4 seconds. - Stop the program by pressing the START/PAUSE knob (F). - Using the MENU knob (B) move to child lock option. - Press the SELECTION knob (C) to disengage the function.
- Page 20 Start the operation Pumping the water out Use it when the washing program was interrupted or if pump stop function was engaged, and you only wish to pump the water out of the drum, without spinning. Spinning Aggressive spinning for non-delicate laundry at high spin RPM.
- Page 21 Interruptions START knob (F) and the machine will finish the program with the spin, determined by that particular program. In case you would like to alter the washing program, turn the program selector to the position “0”, followed by the selection of rinse or merely pumping the water out.
- Page 22 Special functions (certain models only) Permanent suspension - change of program By turning the program selector to the position “0” the program is permanently suspended. Consequently you may select a new program (see Program selection). • Failures Program is suspended in case a failure occurs. This is signalled by the relevant reading on the display and a sound signal (see cf.
- Page 23 - Now minutes start flashing; they are set the same way as hours. - Confirm setting by pushing the MENU knob (B). - Return the program selector back to “0” position. Set time is automatically saved. • Setting the Clean water sensor In order for the Clean water sensor working properly, it must be first calibrated with water that the washing machine is connected to.
-
Page 24: Tips For Washing And Saving Energy
Tips for washing and energy saving • Before washing sort out the laundry according to the type, degree of dirtiness and color resistance. • Prior selecting the washing program consult the sewn tab with information on a particular piece of laundry (see Maintenance chart on the last page). - Page 25 Hardness scale Degree of hardness °dH(°N) 1 - Soft 2 - Medium 7-14 3 - Hard 14-21 4 - Extra hard >21 In case of hard water add detergent according to the Chart for degree 1 and add appropriate quantity of water softener (see manufacturer’s instructions).
-
Page 26: Cleaning And Maintenance
Cleaning and maintenance Disconnect the washing machine from the mains before cleaning! • The casing should be cleaned with soft cloth and mild detergent. • The interior of the drum and the door gasket is cleaned by washing at 60°C without laundry and adding half quantity of detergent. - Page 27 • Wash it under running water using a brush, and dry it. Remove any leftover dried detergent from the bottom of the casing. • Clean frequently the water inlet hose screen under running water. • After each wash wipe the door rubber gasket. This will prolong its useful life.
- Page 28 • Turn it anti-clockwise, pull it out and clean under running water. • Insert the filter back as shown on the picture (arrow and pointer), and tighten by turning it in clockwise direction.
-
Page 29: Failures
Failures Failure Possible cause The machine does Machine is not powered. not work (display is not illuminated). Water does not Filter is not tightly screwed in. enter the machine. Inlet pipe is not tightly screwed to the machine or to the water faucet. - Page 30 Failure Possible cause The machine The machine is not properly moves during leveled. operation. Transport brackets are not removed. The machine Unevenly distributed laundry, vibrates during the especially with very small spin. quantities (for ex. only the bathrobe). Excessive foaming Excessive measure of during washing.
- Page 31 Failure Possible cause Detergent residues Low water flow pressure. in the dispenser. Some detergents may stick to the dispenser rather hard if it is wet. Softener is not Sucking cover is not correctly completely rinsed, positioned or is clogged. or water is left in the dispenser dish.
-
Page 32: Tables
Tables Program chart - 6kg Basic programs Type of laundry Cotton Cotton Cotton heavy * Cotton Synthetics Synthetics Synthetics Delicate Delicate Wool Wool Manual wash Manual wash Jogging Water cons. max. 1800 max. 1000 max. 700 max. 800 max. 400 max. -
Page 33: Manual Wash
Program chart/ Additional functions Program Basic programs Cotton Cotton heavy Synthetics Delicate Wool Manual wash Jogging Partial programs Rinse Softening Pumping water Spin l possibility... -
Page 34: Maintenance Chart
Maintenance chart Normal wash Max. washing temp. 95°C Delicate wash Whitening Whitening in cold water Ironing Hot iron max. 200°C Dry cleaning Dry cleaning in all solvents Drying Place on flat surface Max. Max. Max. washing washing washing temp. temp. temp. - Page 36 PS PG3,4 OEM SMEG 155620/en (02-06)